Arduino Serial
Development boards, expansion boards, and their corresponding driver boards based on the Atmega series chips.
Arduino Uno R3
Development board based on the ATmega328P, with 14 digital I/O pins, 6 analog input pins, a 16MHz crystal oscillator, and a USB-B interface.
Ble-Uno
Development board based on the ATmega328P with 14 digital I/O pins, 6 analog input pins, built-in BLE, and a USB-C interface.
Maker-Uno
Development board based on the ATmega328P, 8 analog input pins, dual-channel motor driver, CH340G driver, USB-B interface.
Usb-C Uno R3
Development board based on the ATmega328P, with 14 digital I/O pins, 8 analog input pins, CH340G driver, and a USB-C interface.
Ble-Maker-Uno
Development board based on the ATmega328P, 8 analog input pins, dual-channel motor drive, built-in BLE, a USB-B interface.
Arduino Nano V3.0
Development board based on the ATmega328P, 8 analog input pins, fully compatible with the official Arduino Nano V3.0, and a USB-C interface.
Ble-Nano
With 14 digital I/O pins, 8 analog input pins, fully compatible with the official Arduino Nano V3.0, built-in BLE, and a USB-C interface.
RF-Nano
Development board based on the ATmega328P, with 14 digital I/O pins, 8 analog input pins, built-in NRF24l01+, and a USB-C interface.
Mega2560 R3
Based on the ATmega2560 chip, this development board offers 54 digital I/O pins, 16 analog input pins, and 256KB of flash memory
Arduino Uno R4 WIFI
Features 14 digital I/O pins, 6 analog inputs, and 256 KB of flash memory, offering built-in WiFi/Bluetooth connectivity for IoT projects.
LGT-Nano Pro Mini
LGT8f328P-QFP32 processor, size-compatible with Arduino Pro Mini, supports DIY mode, with a maximum internal oscillator frequency of 32 MHz.
LGT-Nano Usb-C
LGT8F328P processor with Type-C port, size-compatible with official Arduino Nano 3.0, supporting DIY mode.
MotorDriverBoard
A multifunctional motor driver board for Arduino Uno and Mega2560, utilizing I2C and PCA9685 communication to control motors and servos.
PH2.0 Sensor Board
PH2.0 Sensor Board V3.0 is a complete PH2.0 reverse-connection protection expansion board designed for the Arduino Uno R3 mainboard.
PH2.0 Motor Sensor Board
PH2.0 Motor Sensor Board is an expansion board that adds dual-channel motor drivers to the base PH2.0 Sensor Board.
Nano V3.0 Expansion Board
Compatible with the Arduino Nano V3.0 mainboard, featuring an nRF24L01+ expansion interface, and 3.5mm terminal wiring.
Micro:bit Serial
Development boards, expansion boards, and their corresponding driver boards based on the micro:bit series.
Micro:bit V2
The micro:bit V2 is a microcomputer board designed for programming education, enabling students to create a variety of interactive projects.
IO:BIT
IO:BIT breaks out all 19 PIN pins from the micro:bit motherboard, and each pin is equipped with VCC and GND power pins.
Sensor:bit
Sensor:bit is a PH2.0 interface expansion board designed for Micro:bit, providing convenient connectivity for external sensors.
Motor:bit V1
Motor:bit V1 is a beginner-friendly micro:bit motor driver board, ideal for building four-wheel-drive cars and other starter robotics projects.
Motor:bit V2(Cross)
Motor:bit V2(Cross) can simultaneously drive 4 motors and 8 servos, ideal for building complex robots.
Motor:bit V2(Vertical)
Motor:bit V2(Vertical) can simultaneously drive 4 motors and 8 servos, ideal for building complex robots.
ESP32 Serial
Development boards, expansion boards, and their corresponding driver boards based on the esp32 series.
Maker-Esp32
Based on the Espressif ESP32 main control, a motor-driven expansion board for makers is constructed.
Maker-Esp32-Pro
A driver board based on the Espressif ESP32 microcontroller, capable of driving four encoder motors.
Esp32-Uno
ESP32-Uno is a development board based on the ESP32-DOWD-V3 chip, designed with an Arduino Uno-compatible form factor for easy integration .
Esp32-Devkit-32E
The ESP32 DevKit 32E, based on the ESP32-D0WD-V3 chip, is fully compatible with other ESP32 development boards.
Esp32-CAM-V2
Wi-Fi + Bluetooth 4.2 module/camera, supports remote monitoring via mobile phone or computer, standard with 2-megapixel resolution.
Esp32-S3-CAM
ESP32S3-CAM is a small-sized wireless camera module developed based on the Espressif ESP32-S3R8 chip.
NL-Esp32-S3-Devkitc
NL-ESP32-S3-DevKitC is a development board based on the ESP32-S3-WROOM-1-N16N8 module from Espressif Systems.
Esp32-Expansion-Board
This ESP32 IO expansion board fully breaks out all GPIO pins for boards like ESP32-DevKit-32E, making it easy to connect sensors and modules.
Esp32-IOT-Board
esp32 iot board based on the ESP32 module and features PH2.0 interfaces, making it more convenient to connect external sensors.
iot:bit
IoT:bit is a product developed based on Espressif's ESP32-D0WD-V3 chip, featuring micro:bit-compatible dimensions.
Scratch Arcade
RaspberryPi Serial
Development boards, expansion boards, and their corresponding driver boards based on the Raspberry pi series.
Raspberry Pico
The Raspberry Pi Pico features the RP2040 (an ARM Cortex M0+ dual-core 133MHz processor with 264KB SRAM), 2MByte Flash, and 40 pins.
RaspberryPi-Sensor-Board
The Raspberry Pi Sensor Expansion Board is designed specifically for the convenience of external sensors for Raspberry Pi.
RaspberryPi-MotorDriverBoard
A multifunctional motor driver board for RaspberryPi, utilizing I2C and PCA9685 communication to control motors and servos.